LED Downlights Installation Guidelines

LED downlights are often as smooth to install as any everyday incandescent mild bulb. Most applications involve plugging them into a socket that runs off your mains Alternating Current (AC 110-230V) and due to the fact correct great LED lighting fixtures have their very own integrated transformers, it is a plug and play, DIY scenario that can be without problems and fast achieved without the need for transformers on each downlight – that is frequently the annoying case whilst going for walks halogens. However, it’s far vitally important to word that there are some scenarios that require a chunk greater tinkering in order that your LED Downlights work at an premier stage and do not get damaged in the system.

Two important considerations to do not forget whilst installing surface mounted downlight your LED lights is whether or not your downlights can be going for walks off a Direct Current (DC 12V) set up and / or whether you are the usage of a dimmable option. In each instances, it’s miles vitally vital to make sure that you have the proper hardware setup so that your LED Downlights can shine their first-rate and throughout their fantastically lengthy operational lives.

Firstly, in case you are seeking to run your downlights off a 12V DC device, you’ll need to buy MR16 (socket type) downlights and feature the right transformer set up. The Magnetic Transformer is the most typically used power modulating tool for maximum homes and agencies, and is the transformer type required to optimally run your LED lighting. They are also very cheap and you can supply them at any electric keep. If you’ve got one, then fantastic – again it’s an clean plug and play. However, LED Downlights will NOT run off an Electronic Transformer (or higher recognised inside the technical international as “Switch Mode Power Supply”). So – first-rate guess is to get your pleasant neighbourhood sparky (electrician) to are available in and have a glance-see as s/he could be able to perceive, supply and replace that transformer if required.

It’s worth mentioning that you need to now not run a mix of different lighting fixtures technologies on the identical 12V circuit as you could experience a drop in illumination of your LED Downlights or they may no longer turn on at all. With a 12V gadget it’s far both all LEDs or all Halogens.

Secondly, if you need that allows you to dim your led lights, then you may need to purchase a dimmable LED Downlight option and have the right dimmer switch established. A Bell-Push Dimmer Switch is the surest tool used for controlling the growth or lower of voltage to your dimmable LED Downlights and should be made available to you by means of your LED Lighting supplier whilst you make your buy. LED lights will NOT run nicely (or at all in some instances) off the vintage styled Push-Button dimmer switches. Again, just like the Magnetic Transformer, a Bell-Push Dimmer transfer is both critical and relatively inexpensive to buy.

So, if you require a 12V LED Downlight or a dimmable option (both on AC or DC currents) you’ll need to make certain you have a Magnetic Transformer in location or a Bell Push Dimmer Switch mounted respectively. This will make sure that your LED lighting fixtures function at a a hundred% efficiency and stay out their quite long lives without any hassles. Be sure to follow the LED Downlights Installation hints as furnished by your LED Lighting provider and use a trained electrician have been necessary to finish the set up accurately and right the first time around.